Pvc Resin Kanevinyl Paste K131 For Pipe Joint
Clarity is poorer than Suspension or Bulk PVC. Paste grade Resin is compact in structure, and does not absorb much Plasticiser at room temperatures. Temperatures in excess of 160-180oC are needed to drive the plasticer into the Resin during curing. Paste grade Resin is extensively used for Cushion Vinyl Floorings of wide widths. Different layers of specially formulated pastes are coated either on a suitable substrate (Direct Coating) or on Release Paper (Transfer coating). The layers are fused continuously in long ovens and rolled up after release paper is stripped off. The rolled good flooring can have a tough semitransparent wear layer over printed and foamed layers which are sitting on top of highly filled base coats to build up the thickness. Many extremely attractive and rich effects are possible and these represent the higher end of Vinyl Flooring.
Besides, we also have PVC Paste, Titanium Dioxide, Iron Oxide Pigment, Carbon Black, Chrome Yellow, Chrome Green etc to colorful your PVC products.
Specification:
PVC RESIN PASTE TDS:
| Parameter | Grade |
| Standard: GB15592-2008 | 1156 | 1302 | 1702 |
| K - Value | 67 | 70 | 78 |
| Viscidity, ml/g | 100-120 | 115-135 | 154-174 |
| Polymerizing Index | 900-1150 | 1100-1350 | 1700-1950 |
| Volatile component, % ≤ | 0.4 | 0.4 | 0.5 |
| Paste thickening rat (24h)/ ≤ % | 100 | 100 | 100 |
| B-typeviscosity /Pa.s | 6.0-10.0 | ≤4.0 | ≤4.0 |
| Sieve residue %, mg/kg | 250um ≤ | 0 | 0 | 0 |
| 63um ≤ | 0.1 | 0.1 | 1.0 |
| VCM Residue PPM ≤ | 5 | 5 | 10 |
| Whiteness (160°C,10min)/ % ≥ | 80 | 80 | 76 |
| Number of impurity particles ≤ | 12 | 12 | 20 |
| Scraper fineness um ≤ | 100 | 100 | 100 |
PVC Resin TDS
| | |
| | | | | |
| | | | | |
| | | | | |
Number of impurity particles ≤ | | | | |
Volatile content (incl. water) % ≤ | | | | |
| | | | | |
| | | | | | |
| | | | | |
Number of Fish Eye (/400 cm2) ≤ | | | | |
| | | | | |
Whiteness (160°C, after 10 min.) % ≥ | | | | |
| | | | | |
Application:
1156: Foam wallpaper, foam floor tile, rotary foaming.
1302: Foam floor, plastic material high bright coating chemical.
1702: Non-foaming artificial leather bottom, surface of artificial leather and floor leather, canvas, maceration forming (gloves, boots), rotary forming (toy), hollow forming and rubber, bottle caps
SG3 is for films, hoses, leathers, wire cables and other general purpose soft products.
SG5 is for pipes, fittings, panels, calendaring, injection, moulding, profiles, and sandals
SG7 / SG8 is for bottles, sheets, calendaring, rigid injection and moulding pipes.
Package:
PVC RESIN By 25kgs/pp bag 17mt per 20'fcl 26mt per 40'fcl
PVC Resin Paste By 20 kg bag, 12 tons/20’GP, 25 tons/40’GP
Product Categories : Resin > Pvc Resin
